Products tagged with '3M'

3M™ Scotch-Weld™ Hi-Strength Postforming Cylinder Spray Adhesive 94 CA is a strong adhesive that bonds a range of large surfaces and is perfect for large-scale laminations. This adhesive formula is easy to dispense and apply directly onto surfaces. Extended tack allows for longer bonding range. Bonds to a variety of demanding substrates like decorative laminate, metal, and some rubbers. It is typically used in woodworking and specialty vehicle applications, especially where VOC's are a concern.

3M™ Polyurethane Multi-Purpose Adhesive 5010 is a fast grabbing, 100% solids, one-part polyurethane based moisture curing adhesive for bonding a wide range of materials. Used for bonding of hardwood to many substrates including polystyrene. Excellent water resistance for outdoor usage.

3M™ Polyurethane Adhesive Sealant 540 is an all-purpose, single-component, moisture-curing, gap-filling polyurethane adhesive that creates permanently elastic seals and bonds in a wide variety of service environments. Used to bond a wide variety of materials, including plastics, fibreglass reinforced plastic (FRP), sheet molding compound (SMC), aluminum, steel, coated metal and wood. It exhibits high tensile strength, good UV resistance, low Shore A hardness and low modulus to maintain its functionality in a wide range of extreme service environments. Will perform in temperatures ranging from 40°F/ 40°C to 194°F/90°C. Once skin forms (60 90 minutes), the sealant can be painted to improve the final finish.

3M™ Polyurethane Adhesive Sealant 550 is a fast curing, one component, moisture curing product which forms permanent elastic bonds. They bond to a wide variety of materials including plastics, metals, fibreglass, and wood. Provides excellent adhesion to concrete, wood, aluminum, most lacquered metals, polyester, glass, stone, and many other substrates.

3M™ Fire Barrier Sealant 15WB+ is a high-performance latex-based intumescent firestop sealant. When properly installed, this product provides up to three hours of fire protection in tested and listed systems. Ithelps prevent the spread of fire, smoke and noxious gas. In addition, this product acts as an acoustic barrier by minimizing noise transfer (STC-Rating of 54 when tested in a STC 54-rated wall assembly), helps create a smoke seal for systems requiring the optional L-Rating, meets the intent of LEED® green building program credits VOC environmental regulations, meets International Building Code (IBC) and other key life safety building code requirements.

3M™ FireDam™ Fire Barrier Sealant FD150+ is an acrylic latex caulk used to firestop metal pipes and cables through concrete or gypsum and for use in dynamic head-of-wall systems. A single-part, sag-resistant, water-based acrylic latex sealant, this sealant has excellent adhesion characteristics to most common construction materials. In addition, since it dries to the touch within one hour, it can be painted for a more professional-looking job.