Products tagged with '2-part'

3M™ Scotch-Weld™ Acrylic Adhesive DP8425NS is a non-sag, two-part acrylic adhesive. This tough adhesive offers improved adhesion to many plastics and metals, including those with slightly oily surfaces. It is a durable product that features a fast rate of strength build to provide structural strength in just minutes. With a 10:1 mix ratio, it features a 23-minute work life to allow time to position substrates prior to adhesion. This working life, open time and cure time can be accelerated with heat. Once fully cured, this adhesive will reach 1,000 psi (7 MPa) of overlap shear strength in approximately 53 minutes, increasing throughput and productivity while featuring a high peel and impact performance. Full cure will be reached within 24 hours.

LOCTITE® EA 9017 (known as FIXMASTER® FAST CURE POXY PAK™ EPOXY) is a 2-part, room temperature curing epoxy adhesive used for high strength, permanent bonding of metals, ceramics, concrete, wood, glass and most plastics. This product can withstand temperatures up to +300°F (+149°C).

LOCTITE® EA E-90FL is a grey, opaque, 2-part, toughened, medium viscosity, industrial grade solid epoxy adhesive. After curing at room temperature, it forms a flexible, grey bondline with excellent resistance to shock and impact, a wide range of chemicals and solvents and acts as an excellent electrical insulator. Suited for low-stress, high-impact bonding applications of dissimilar materials.

LOCTITE® UK U-05FL is an off-white, 2-part, medium-viscosity, industrial grade, polyisocyanate urethane adhesive. It cures at room temperature to form a highly flexible bond line, providing excellent peel and shear strength. Ideal for bonding a variety of metals, plastics, glass, wood and more, it can also be used for potting and encapsulating strain and heat sensitive electronic components.

3M™ Scotch-Weld™ Flexible Acrylic Adhesive DP8610NS is a black, non-sag, low odour, two-part acrylic adhesive. Features a high elongation acrylic adhesive with structural strength that is ideal for bonding dissimilar materials, thin panel applications where bondline read-through is a concern, or any other application where a flexible bond is needed.